Who is the best counter gonker

2021.12.02 22:41 theboijames Who is the best counter gonker

submitted by theboijames to forhonor [link] [comments]


2021.12.02 22:41 PaulBearerK What’s y’all first impression??

What’s y’all first impression?? submitted by PaulBearerK to NBAYoungboy [link] [comments]


2021.12.02 22:41 RetroFantasies What's a good hairstyle for flat caps?

I'm pretty ignorant with hair styling and care. I got into flat caps due to a bad habit of mine where I comb my curly frizzy wet hair back, then, wear the cap to straighten the hair out and keep its usual shape. Without it, it curls up into a frizzy mess and I hate it. It does the job, however, my hair goes down about an inch or an inch and a half below my ears and the cap doesn't really end up covering that area of course so it sort of bushes up. I honestly love wearing my flat cap but I want to take it off when indoors with a hairstyle that can also keep its shape when compressed by my hat and also look good to me. What I am doing right now doesn't really look good, especially when I take the hat off since it'll end up looking like this. Overall, the hairstyle doesn't really look my age (19) and it isn't properly treated since it looks a bit thin and frizzy to me. I would try to shape up my hair with gel but the moment I put on my hair my hair will stay really compressed and flat and just not look good. I'm just looking for any advice on getting a medium-sized style that keeps its shape after wearing something like a flat cap. Here are some small examples I have: Example with hat | Example without a hat
submitted by RetroFantasies to malehairadvice [link] [comments]


2021.12.02 22:41 wordtomytimbsB Is my opponent cheating or is my game buggy?

I’m up rn 2-0 in a game and my opponent paused for 2 minutes. No that they unpaused I’m frozen in the pinpoint meter and they’re bunt dancing.
Did they freeze me somehow or is it just a coincidence?
submitted by wordtomytimbsB to MLBTheShow [link] [comments]


2021.12.02 22:41 Zblb Why do people who advocate for pro choice use religious freedom as an argument for pro choice? Isn't anti religion basically a religion?

So I recently saw a post where some news broadcaster was getting upset about people forcing their religious beliefs on other people. The argument for pro life was that religion shouldn't be used to create laws because we have freedom of religion in the US.
Now I agree with pro choice, but if anyone truly believed that religion has no place in politics and that freedom of religion is just, then there shouldn't be laws that prohibit behavior by religious people (For example a lot of religions are anti lgbtq which means there shouldn't be laws that condone negativity towards lgbtq people). If you decide that they are in the wrong to have that religious belief, and you get a bunch of people to agree with you, that belief is identical to their religious belief and now you are putting your personal religion in politics. Creating laws against their religious beliefs undermines freedom of religion.
It seems like we have gotten to a point where all political parties are basically religions.
I'm just kind of confused on how to interpret all of this.
submitted by Zblb to TooAfraidToAsk [link] [comments]


2021.12.02 22:41 Effective_Story3261 pseudohypoparathyroidism type 1a and Albright Hereditary Osteodystrophy.

pseudohypoparathyroidism type 1a and Albright Hereditary Osteodystrophy. submitted by Effective_Story3261 to fellowshipofthebib [link] [comments]


2021.12.02 22:41 Theginger2009 31M it’s a rough day can someone cheer me up?

31M it’s a rough day can someone cheer me up? submitted by Theginger2009 to selfie [link] [comments]


2021.12.02 22:41 Jlevitt95 An RC car race

An RC car race submitted by Jlevitt95 to rccars [link] [comments]


2021.12.02 22:41 australiansize They nveer stay in my pants

submitted by australiansize to bigballsproblems [link] [comments]


2021.12.02 22:41 happyjoy_11 I’m just a stranger trying to help

To whom it may concern, hullo!
I am but a simple high school student trying to make a difference in the world.
I’ve heard about what people go through irl and online. People with depression, anxiety, stress, etc. I’ve heard stories of friends who’ve killed themselves, or who have tried. People wanting to run away to escape, and to be free from the pain. People who’ve become numb to the pain so much, that cutting themselves is a part of their daily routine, and they’ve become accustomed to it. And I for one, find that heartbreaking.
It saddens me to see people who feel this way, and to know that I can’t help them or fix their problems. And I want to help, I really do. I want to be there for people, and to make them happy, if only for a little bit. It can be the most minuscule thing, like a simple complement, to a full blown attempt at a therapy session. Because I want to make a difference in this world.
Some of you I’ve already messaged on Reddit. Hell, I might’ve messaged you, the reader. But, I like to believe that I’ve helped people, and that I’ve made someone’s day before. And that’s something that I want to keep doing, until I’m 6 feet under, and I’ll keep doing it afterwards. You may not accept may offer to help, not now or ever, but I want the option to be there for people if/when they need it.
So, dear reader, my DMs are open to you if you need help, escapism, or just to chat. I’m here for you, and will get back as soon as possible. I may not have the right answers, nor the best advice, but I’ll make damn sure I try my hardest.
Feel free to ignore this if you want. I’m just a stranger trying to help!
submitted by happyjoy_11 to teenagers [link] [comments]


2021.12.02 22:41 L1Lhatchling Aw yiss

Aw yiss submitted by L1Lhatchling to GuardianTales [link] [comments]


2021.12.02 22:41 HNMusicVideos Jane & The Boy - Waste Our Time [Pop / Dance]

Jane & The Boy - Waste Our Time [Pop / Dance] submitted by HNMusicVideos to musicvideo [link] [comments]


2021.12.02 22:41 tony24k https://t.me/+fgL5zlrqGSZjNGQx Tapn for methods etc.

https://t.me/+fgL5zlrqGSZjNGQx Tapn for methods etc. submitted by tony24k to YungNenaa [link] [comments]


2021.12.02 22:41 t0b4cc02 flashing updated firmware / fix mcu 'mcu': Command format mismatch:

I started to write this post to seek help but in the progress I solved it. Ill leave this here since so many have this problem due to the last klipper update doing breaking changes...

Hi!
I have an ender3 pro with skrmini e3 v2. I have a raspberry pi b3+ with klipper and fluidd installed.
As for many others I was suprised that the last update broke the printer.

 mcu 'mcu': Command format mismatch: config is_config=%c crc=%u is_shutdown=%c move_count=%hu vs config is_config=%c crc=%u move_count=%hu is_shutdown=%c This type of error is frequently caused by running an older 
version of the firmware on the micro-controller (fix by recompiling and flashing the firmware).
Known versions: host=v0.10.0-172-g051133f8, mcu=v0.9.1-616-g28f60f7e Once the underlying issue is corrected, use the "RESTART" 
command to reload the config and restart the host software. Protocol error connecting to printer
So to make it clear. It means that the firmware on the skr mini (0.9) does not work with the klipper version i have on the pi (0.10) (Right?)
So I try to make a new firmware and put it on the printer. Last time I did this I compiled the firmware on the pi through putty and then put the resulting file onto the sd card renamed to firmware.bin
So I did this:
cd ~/klippe 
make menuconfig sudo service klipper stop make clean make
$ make Creating symbolic link out/board Building out/autoconf.h Compiling out/src/sched.o Compiling...... ** it compiles a list ** Building out/compile_time_request.o Version: v0.10.0-172-g051133f8 Linking out/klipper.elf 
sudo service klipper start
I copied that to my (fat32 formated) sd card with:
scp pi@192.168.1.7:~/klippeout/klipper.elf firmware.bin I put sd card into the printer. Turned on the printer. Turn off the printer. Turn it on again. Try to reconnect with klipperthrough fluidd. 
And now it still give the same error message.
I also tried with
make flash FLASH_DEVICE=/dev/serial/by-id/usb-Klipper_stm32f103xe_35FFD7054246303210831757-if00 
where that device string is what i get from
ls /dev/serial/by-id/* 
Please correct me if im wrong. This should update the skr mini with the correct firmware through the usb cable. Is that correct?
$ make flash FLASH_DEVICE=/dev/serial/by-id/usb-Klipper_stm3 2f103xe_35FFD7054246303210831757-if00 Creating symbolic link out/board Building out/autoconf.h Compiling out/src/sched.o **** COMPILING ....**** Compiling out/src/linux/sensor_ds18b20.o Building out/compile_time_request.o Version: v0.10.0-172-g051133f8 Linking out/klipper.elf Flashing Installing micro-controller code to /uslocal/bin/ Attempting host MCU restart... 
I restart through fluidd. Still same error.
My local klipper master branch, that im operating from, is up to date with origin/master.
It seems like making the config works (suggesting the 0.10 version has been made) But after that I somehow fail.
---------- FIX ----------
Now this turned into a rubberduck debugging session. I tried to validate my last claim - that the firmware correctly compiled. I checked the settings again and google what the correct config is for skr mini e3 v2
And sure I found a difference online in the first guides. I had selected "raspberry pi" or sth.
So I Tried:
make menuconfig Ensure that the micro-controller architecture is set to ‘STM32’ Ensure that the processor model is set to ‘STM32F103’ Ensure that the Bootloader offset is set to ‘28KiB’ Ensure that the Clock Reference is set to ‘8 Mhz’ Ensure that “Enable extra low-level configuration options” is selected. Ensure that “Use USB for communication (instead of serial)” is selected. Ensure that “GPIO pins to set at micro-controller startup” includes ‘!PA14’. Loaded configuration '/home/pi/klippe.config' Configuration saved to '/home/pi/klippe.config' 
Then I failed to update over serial. (*later I noticed that I unplugged the usb cable to the pi at some point...)
So I went for update over sd card:
sudo service klipper stop make clean make Version: v0.10.0-172-g051133f8 Preprocessing out/src/generic/armcm_link.ld Linking out/klipper.elf Creating hex file out/klipper.bin sudo service klipper start 
This time make made a .bin file wich made me happy because thats what I actually expected to happen all the time. (i have saved the command to copy that file)
So I open a powershell again from the sd card to copy the file:
scp pi@192.168.1.7:~/klippeout/klipper.bin firmware.bin 
swap pi with the user you ahve on the raspberry pi, and the ip adress with the ip of the pi.
then turn off the printer. put the sd card in. turn on the printer.
for me this updated correctly and after a restart command through fluidd ui i reconnected to the printer.
submitted by t0b4cc02 to klippers [link] [comments]


2021.12.02 22:41 Cochrane01 What was your favourite time growing up in the early/ mid/ late 2000s ?

submitted by Cochrane01 to AskReddit [link] [comments]


2021.12.02 22:41 I-Have-No-Life-146 aircrack-ng with egpu on kali

Is it possible to connect an egpu to my macbook and run kali on it, so aircrack-ng will run faster. If it is, how long do you think it will take to run crunch 8 12 1234567890qwertyuiopasdfghjklzxcvbnmQWERTYUIOPASDFGHJKLZXCVBNM | aircrack-ng —bssid aa:aa:aa:aa:aa:aa -w- handshakefile.cap if I had a GeForce RTX 3060?
submitted by I-Have-No-Life-146 to hacking [link] [comments]


2021.12.02 22:41 beezlebub2019 Zekrom raid 4592 5124 1119

submitted by beezlebub2019 to PokemonGoRaids [link] [comments]


2021.12.02 22:41 DankMeme_Enthusiast Do you have any M200 plants? If so, what are they?

None here
submitted by DankMeme_Enthusiast to PlantsVSZombies [link] [comments]


2021.12.02 22:41 cmd4211 2nd and 3rd try

submitted by cmd4211 to ArtOfRolling [link] [comments]


2021.12.02 22:41 ToiletGrenade Legendary CLI Potentially(?) Making EG Games Feasible on Linux

As of a couple days ago I've been using Heroic Games Launcher, which is an open source third-party client of the Epic Games Launcher that has native Linux support for those that don't know, primarily to play the recently free on Epic, theHunter: Call of the Wild. Its almost tradition for me to play theHunter games on Linux because of how well they tend to work on here. So far, it works shockingly well, to the point that multiplayer (at least in theHunter: COTW and Borderlands the Pre-Sequel) works when using the Epic versions. Admittedly, the connection stability is less than ideal but the fact that it works at all is a testament to the evolution of compatibility layers like Wine and Proton, as well as APIs like DXVK and OpenGL. I highly recommend that anyone interested in getting their Epic library working on Linux to perhaps entice any other curious Windows users like myself that have had no choice but to continue at least partially using Windows to keep being able to play most games, to try either the base Legendary CLI or Heroic Games Launcher (Legendary CLI but with GUI). This is a massive step in the right direction, and with a little love and interest, there will be a point where Linux will be just as viable of an option for gamers as Windows. Thanks for reading!
submitted by ToiletGrenade to linux_gaming [link] [comments]


2021.12.02 22:41 big_chunko Can't speak to the world serpent

I'm at the point where you have to have mimir blow the horn, but every time I try the characters audio cuts off and it won't let me interact with the horn.
submitted by big_chunko to GodofWar [link] [comments]


2021.12.02 22:41 snffali NEW VIDEO!! FORZA 5 HORIZON

NEW VIDEO!! FORZA 5 HORIZON submitted by snffali to Youtubeviews [link] [comments]


2021.12.02 22:41 Alexdakoolkid Can my laptop run Skyrim with mods?

I want to join the modded aspect of the game since I've been mainly playing it in PS5 and Switch but I'm not sure if my PC will work since I can't find specific answers online. Can someone with more experience help me out?
The model is: HP Laptop 17-ca2xxx
Processor: AMD Athlon Gold 3150U with Radeon Graphics 2.40 GHz
Installed RAM: 4.00 GB (willing to upgrade to 16GB)
submitted by Alexdakoolkid to skyrimmods [link] [comments]


2021.12.02 22:41 PCisLame A Dirty Demented Dingbat Degenerate has been ARRESTED in the senseless MURDER of a prominent Democrat & friend of the Clinton’s in the rapidly Devolving Democrat-run SHITHOLE of Los Angeles. Is anyone SURPRISED?

A Dirty Demented Dingbat Degenerate has been ARRESTED in the senseless MURDER of a prominent Democrat & friend of the Clinton’s in the rapidly Devolving Democrat-run SHITHOLE of Los Angeles. Is anyone SURPRISED? submitted by PCisLame to DescentIntoTyranny [link] [comments]


2021.12.02 22:41 en-jo I stop sertraline 2 weeks ago. Is this part of withdrawal ?

My gp wants me to start on Zoloft 25mg. I took it for 3x days, I can’t handle the side effects, so I taper it off 12.5mg for another 3x days. So I took Zoloft for a week then stopped,
2 weeks fast forward, my headache came with a weird burning sensation and nausea. Is this part of withdrawal? How long withdrawal symptom tend to stop
submitted by en-jo to zoloft [link] [comments]


http://timetomake.ru